Chimney Liner Options Part Eight

This is because the moisture created in wood burning fireplaces mixes with the creosote and this becomes a gas which rises out of the chimney. However – it really can’t hurt and can benefit you in other ways.

Finally there’s one more reason that insulation is a good idea for your chimney liner – and that’s that having a hot fire and a cold chimney will cause down drafts. This is because air rises – meaning that the air pressure around your fire is lower. In other words there’s a ‘pocket’ of air around your fire where much of the air has risen away, and if you don’t have insulation for your liner, the cold air will rush in to fill this gap (this is the same process that causes wind – wherein the warm earth heated by the sun has the same effect as a fireplace).

If you don’t get insulation and good flue liners then, you will find that the wind rushes in and blows the fire while also making your room colder. Again this will also create a lot of noise and be upsetting for you to listen too.

Chimney Liner Options Part Seven

Thus when it is cold it will get very cold and that will mean that it will attract condensation – which is a by-product of the burning of your fires (hence the term ‘non condensing furnace’). This will attach onto your chimney liner and this is a serious problem as condensation is acidic and highly corrosive – meaning it would eat away at the liner and eventually completely deteriorate it.

Worse, if you get condensation on your chimney liner, then you will likely also get creosote on your liner and this is very danger as creosote is a dangerously flammable substance which can cause chimney fires. The colder your chimney is, the more creosote will stick to it, and the more creosote is on your chimney, the colder it will become.

However bear in mind that this insulation is more crucial for wood burning chimney liner or coal chimney liner. For gas or oil burning fireplaces you will usually be fine with the flue liner on its own.

Chimney Liner Options Part Four

These chimney liners will fit inside of your chimney and it is up to you to make sure that they are fitted all the way along the inside to the top of the chimney and that they are well covered.

Chimney liners have many different purposes and are highly important chimney supplies. The purpose of this is to provide you with lining to contain the combustible products heading through your chimney and helping to encourage them to flow outside thereby making it safer. At the same time they are designed to protect the walls of your chimney from the heat and corrosion that would otherwise occur. They also prevent the smell of smoke and other fumes from lingering in your chimney and help to insulate the chimney itself and prevent too much cold air from getting in and altering the temperature of your property.

For this reason your chimney liner is a good investment and will save you a lot of money in repairing your chimney potentially and in expensive heating costs.

Chimney Liner Options Part Three

Furthermore any chimney liner kits that are designed for your own home installation will of course save you money in other areas and most notably they will save you the costs associated with having the chimney installed or using chimney sweeps in order to let you know whether you need oval chimney liners or other shaped chimney liners. However in most cases note that round chimney liners will be the best fit and will work in the majority of cases.

Of course it still helps to know how much material you need, and if you are going to buy stainless steel chimney liners that you can’t install yourself then you will still need to get estimates regarding how much you need and how much the service will cost. In this case it’s a good idea to get estimates from a few different chimney sweeps and then to take the average estimate as this will give you the closest estimate that is most likely to fit your chimney.

Chimney Liner Options Part Two

When you see your chimney sweep you can ask them to estimate the required size for your chimney liner and it is then possible to get custom chimney liners built to fit the specific size of your chimney and this will of course be the closest thing you can get to a guarantee that your chimney liner will fit.

These custom shapes may be rectangle, circular, oval, square etc and in general you will be charged for your chimney liner by the square foot. You can expect the product to be about 25-40 foot and this will of course depend on the size of your chimney. Whether you have oval chimney liners, or other shaped chimney liners will depend on the size and shape of your chimney. Alternatively using flexible chimney liner kits it may be possible to alter the size and shape of your chimney lining yourself. This then means that you can use flexible chimney liner kits in order to ensure that what you get is the right size and shape for your chimney.

Chimney Liner Options Part One

When you come to select your chimney liner, also known as a flue liner, there are several different things to consider and many different types of chimney liner available on the market. Knowing what to buy for your own chimney isn’t always easy and it can be a struggle to find the chimney liner for you when there are so many different models available. It’s not something you will do very often and so it’s understandable if you are not well versed in chimney liners and what the differences between them are. Here we will look at what chimney liner options you have and how to go about installing the right chimney liner for you.

So as mentioned there are many different types of chimney liner and these will depend on which of the many different types of chimney you have, its dimensions and the type of fireplace you have burning underneath. For instance wood burning fireplace inserts may be different from other forms of chimney liners. You can also get different materials for your actual chimney liners for instance stainless steel chimney liners.

Getting to know Flexible Chimney Liners

When fitting a chimney liner it is imperative that you use flexible chimney liner kits. Many chimneys are not straight, some often have a kink in them and because of this you need a liner that will adapt to the shape of the chimney. Inside the chimney you might find that the masonry is not straight and even, especially in older properties so again the flexibility to get round these problems is vital.

These liners come in a variety of widths, to suit any chimney stack, and they are either single or twin skinned. The single skin liners are only suitable for oil or gas heating systems, but the duel skinned is more versatile and can be used for those systems as well as multi-fuel, and solid fuel burning.

The basic liner kits available typically include: a top plate for the chimney; a rain cap; appliance connectors; chimney liner warranty; installation instructions and of course the stainless steel flexible chimney liner measured to the required length.

If you are not confident in fitting something like a chimney liner then it would be advisable to contact a local supplier for a list of recommended installers. They will be experienced at fitting and be able to give you and advice needed to help maintain your chimney liner kit.

Chimney liners for multi-fuel and gas and oil heating systems

If you are looking to buy a chimney liner for your home you should be aware that there are different liners available, depending on whether you use multi-fuel heating or oil or gas heating. Both of these stainless steel chimney liners are used for lining masonry chimney stacks, the main difference being that the multi-fuel liner has a twin-skin construction whereas the oil/gas fuel liner has a single skin construction.

The multi-fuel liner is deeply corrugated on the outside skin but smooth on the inner core. This makes it easier for cleaning and there are no areas for the tar and soot to build up. This liner can be used for wood burning stoves, multi-fuel systems, open fires and can also be used for gas and oil appliances, making it a very versatile liner as you can change your heating system without worrying about changing the liner. This versatility does make it a little more expensive but you are paying for the convenience.

The oil/gas flue liner has a single skin which is deeply corrugated. This liner is only suitable for use with an oil or gas heating system and because of that tends to be a cheaper option then the multi-fuel liner. It is very important that you use the correct flue liner in order to prevent any problems occurring with your heating and chimney liner.

Just how important is a chimney liner?

If you have an open fire or a wood burner, it is very important that you keep your chimney clean. It is recommended by experts, that you have it cleaned at least once a year, if not more in certain circumstances. Chimneys that aren’t lined can be very difficult to maintain and clean because of the nature of the stone or brick they are made from.

There are many places where soot and tar can build up which are difficult to get to with brushes and other cleaning tools. If you ‘line’ your chimney with a chimney liner then the flue becomes a continuous, smooth tube with fewer surfaces for the soot or tar to condense onto. If any tar does form, it can easily slide back into the fire and be re-burnt. The liner will also prevent any smoke or harmful gases from seeping out of the cracks in your masonry.

Another advantage of lining your chimney is that the smaller, consistent diameter of the flue maintains the velocity and flow of the flue gases in the system which means that the gases will travel faster up your chimney giving them less time to deposit tar and this will automatically improve the draw of your fire, making it more efficient at heating. So for a more effective and cleaner chimney, lining is the way to go!

Industrial Applications:

Industrial applications can use the 316Ti stainless steel  and stainless steel chimney liners to replace aged systems that are no long up to code.   The 316Ti stainless steel is ideal for commercial applications because it is manufactured to withstand higher temperatures and to resist corrosive chemicals.   These manufacturing traits make the 316Ti stainless steel an ideal material for industrial projects.  304L stainless steel is also a great choice of material for both residential and commercial use.  This low-carbon steel is more flexible which means that it can be manipulated on the job site.   In some cases it is better to start with shaped chimney liners rather than trying to make pieces fit on site.  For difficult or custom jobs the professional team at Fireside Chimney Supply can help find just the right material for your job.  They stock Chase covers, Oval Chimney Liners, Rigid chimney liners, flexible chimney liners and fireplace inserts  or they can have pieces customized to fit your specs.  Heavier projects may need the Smoothwall Stainless Steel Chimney Liner.

Be sure to take advantage of their lifetime transferable warranty and free shipping.   Fireside Chimney Supply is open 7 days per week and will walk you through the installation.

Smooth Wall Stainless Steel Chimney Liner: A Best Buy!

A smooth wall stainless steel chimney liner is the latest technology in this wide chimney industry. It combines the advantages of both the improved performance of a rigid chimney liner and flexible chimney liner. This stainless steel liner has a double wall construction which takes advantage of the highest technology involved in making 316 version of stainless steel. The liner is more flexible than any other and offers the best performance you can think of.

A smooth wall stainless steel chimney liner is the most efficient venting because of the decreased turbulence. The liner can be shaped into square, oval and rectangle to take advantage of each cubic inch and more so, offer maximum draft. The stainless steel chimney kit includes cap, collar, tee, top plate, stainless screws and clamp. If your chimney is that straight from top to bottom then this kit is perhaps the perfect one. While taking advantage of the high quality smooth wall interiors, the liner itself will last forever and is easier to clean. Insulation will be required for the solid fuels although this may be optional for gas and oil. The smooth wall will have a smooth flexible interior wall while the exterior is corrugated. There are therefore no sizing restrictions in case of oil and gas applications.

The Benefits and Importance of Chimney Liners

We all love fireplaces. Besides nothing compares to the comfort that fireplace gives during cold winter nights. A fireplace has many parts. Some of them you might no longer be interested or you think that isn't important. But you’re wrong. Each and every part of a fireplace plays a great role. There’s this chimney cap, flue, flue lining, chimney damper and even chimney liners. But what are chimney liners and what are the good things they bring along?

Chimney Liners Have Many Benefits for your Woodstove | Black ...
blackmagicchimneysweep.com10/1/12

Chimney Liners help solve concerns with your chimney flue such as backdrafting and efficiency.

How to Reduce your Chimney and Fireplace Pollution
www.highschimney.com8/29/12

A chimney liner has a number of benefits in pollution reduction. A properly sized liner can make up for a flue that is too big for your fireplace insert. A chimney liner also helps keep the air inside the flue hot, to keep air moving ...

What are the Benefits of a Flexible Chimney Liner? | Chimney Liner ...
 chimneylinerpro.com10/18/10

There are many benefits to installing a chimney liner inside your flue and there are a variety of materials that can be used in chimney liners...

Of how important a fireplace is in once home, only you, the owner, can testify it. But with such great thing comes great responsibility at the same time. Remember that fireplaces must be cleansed not less than twice a year for most fires according to experts are generated from fireplaces that aren't very well maintained. For premium steel chimney liner systems, you can check out - FiresideChimneySupply.com. Save lives and live comfortably!